Coppermine Stats
Photo Albums
• Albums: 308
• Pictures: 2452 · Views: 824204 · Votes: 1316
· Comments: 86
|
585 HE -- Cases In Production --Discussion regarding the reloading of ammunition and tuning of loads for accuracy
Go to page Previous 1, 2, 3, 4, 5, 6, 7, 8 Next
View previous topic :: View next topic |
Author |
Message |
Vince Site Admin
Joined: May 25, 2005 Posts: 15717 Location: Brisbane AUSTRALIA
|
|
Back to top |
|
|
hubel585 Member
Joined: Nov 27, 2011 Posts: 178
|
Posted: Wed Nov 05, 2014 12:14 pm Post subject: Re: 585 HE -- Cases In Production -- |
|
Thanks- Good use is to make big holes easy to see.
Here is a different look at 585 sabots holding 458cal bullets.
Sabots hold leafd as well as jacketed.
Here is a long turned streamlined bullet in our 585.
Anyone wanting to import barrels, actions, cases, etc into Canada from
here can work through Prophet River Firearms in Lloydminster, AB.
The here being the US, as well as our group with barrels, dies, cases,
and McGowen with .585 barrels in stock, CH4D with 585HE dies
in stock, gunshops with # 31 shellholders.
And later few retail outlets setup with cases in stock... . Ed
|
|
Back to top |
|
|
gelandangan Super Member
Joined: May 07, 2006 Posts: 6398 Location: Sydney Australia
|
Posted: Wed Nov 05, 2014 2:13 pm Post subject: Re: 585 HE -- Cases In Production -- |
|
Whoa! First time I saw on Hubel Express 585 for sale down here.
It is on this month' s SSAA Shooter magazine, Ruger No1 + dies + ammo.
If I have spare cash ... and need SWMBO's approval..
_________________ A straight line is the shortest distance between two points.
A smile is the shortest distance between two people.
Do - Not try!
gelandangan.weebly.com/ |
|
Back to top |
|
|
slimjim Super Member
Joined: May 16, 2009 Posts: 8314 Location: Fort Worth TX
|
Posted: Thu Nov 06, 2014 4:45 am Post subject: Re: 585 HE -- Cases In Production -- |
|
How big is the recoil pad you your gun?!?
_________________ "To anger a conservative, lie to him. To anger a liberal, tell him the truth." - Theodore Roosevelt
"The world is a dangerous place to live; not because of the people who are evil, but because of the people who don't do anything about it." - Albert Einstein |
|
Back to top |
|
|
hubel585 Member
Joined: Nov 27, 2011 Posts: 178
|
Posted: Sun Dec 14, 2014 3:03 am Post subject: Re: 585 HE -- Cases In Production -- |
|
Pads about 1.5" thick.
That Ruger killed the first Australian buffalo, done with 585HE.
Another application for our 585 HE is for guys with the 14.5mm
PTRDs, to use our case with chamber insert. In many places 14.5
cases are scarce, real expensive, as well as most 14.5mm cases
being steel are not the easiest to resize/reload. Our case sizes
like regular cases and can be easily reloaded many times.
And in a PTRD with almost a 5 foot long barrel can get 650gr
spitzer bullet to the same speed the 14.5mm gets a 900 gr using
3 times as much powder. 3300 fps. Or get a 900gr at 2800.
Great possibilities for fun shooting. And tactical use in a place
where it would be useful to reload in the operations field, where
steel cases are scarce. A 100 cases do over 2000 reloads.
I like Enfields to put our 585HEs in, for reasonable cost guns. .
Here is inexpensive way to fancy up the Enfield Bolt handle by
cutting the dogleg part of the old handle off and welding on
inexpensive contoured handles I found, one of which is like
Ruger 77 handle, one on the right . Something even a novice
like me can do.....
A lot of guys are crazy about CEB bullets. Here are light 450gr
ones in our 24ga FH. The hollowpoint can range in weight 450gr
to 700gr.. The 24ga FH is nice complement to our
585HE for the shotgun only deer hunters... Ed
|
|
Back to top |
|
|
hubel585 Member
Joined: Nov 27, 2011 Posts: 178
|
Posted: Wed Dec 31, 2014 8:09 pm Post subject: Re: 585 HE -- Cases In Production -- |
|
For lightweight plinking, deer hunting, etc, in 585HE as well as 24ga FH
here is picture of 58cal Hornady sabot that holds .451/.452" light
bullets 225 to 300 gr. A way to shoot targets economically. Low recoil
but a big bang and satisfaction. That sabot is one made for ML, but
with .452" bullet in it is a real tight fit in brass cases, to stay
in place and give good ignition. A 250 gr bullet would go about
mach 4 with a top load..
Here is what 585 bull barrel, target blank looks like, 1 5/8" OD and 32" long.
It'll go in heavy action of some kind. 4th one from the left. The one in yellow
sleave on top, is a heavy contoured one with muzzle of .980" ..The 5th, 6th,
7th blanks on bottom are straight 1.375" 585 regular twist blanks.
One in paper wrapper is slow twist 585 barrel...Ed
|
|
Back to top |
|
|
hubel585 Member
Joined: Nov 27, 2011 Posts: 178
|
Posted: Tue Jan 27, 2015 12:37 pm Post subject: Re: 585 HE -- Cases In Production -- |
|
Here is picture, nice cast bullet I like for the 585HE and 24ga FH.
It is .585" diameter and 650 gr and these particular ones are a
hard lead alloy, plus they've been heatreated. They are about as
hard as copper jacketed softs. These have a flat base, and
fairly streamlined..
But to penetrate good and do great damage to game or target they
can be soft lead and hollowbase like Minie Bullets. Here is picture
of timber drilled through with .585 soft lead Minie from 585HE.
Picture is the back of 6x6 timbers where Minie bullets came out. Ed
|
|
Back to top |
|
|
hubel585 Member
Joined: Nov 27, 2011 Posts: 178
|
Posted: Fri Feb 13, 2015 10:42 pm Post subject: Re: 585 HE -- Cases In Production -- |
|
In Canada there are 3 guys there now setting up 585HEs,
and one setting up 24ga FH. Another friend setting up a 585HE
handed out a bunch of cases and info sheets at the SCI convention.
We are getting some more reamers made. Some more dies sent
here. Another pallet load of cases coming.
Here is picture of a light spitzer bullet in the 24ga FH case,
will work in 585 also. Good for hunting and medium range
target work.
Here is picture of 585HE we did in the FBW with regular two
piece stock.We put a tenon on the forearm to wedge into the
front of the action below the barrel and a tight barrel band
on the front. Ed
|
|
Back to top |
|
|
hubel585 Member
Joined: Nov 27, 2011 Posts: 178
|
Posted: Mon Mar 02, 2015 6:36 pm Post subject: Re: 585 HE -- Cases In Production -- |
|
Here is comparison of our 585HE and Trex case, and while
we have barrels of cases and more coming and many available
in stock in AUS, many are finding Trex cases scarce...
Here is picture of a neat falling block that could work for our
585HE with little work, the Wickcliff.
Here is picture of the singlestack mag box we built for Enfields
fitted to the bottom of BBK action.Very little changing and
it fits a lot of different actions, as a fixed magazine, with its
own feed lips,and we load from the top.Ed
|
|
Back to top |
|
|
hubel585 Member
Joined: Nov 27, 2011 Posts: 178
|
Posted: Wed Mar 25, 2015 2:18 am Post subject: Re: 585 HE -- Cases In Production -- |
|
Here is picture of a 585HE we did in a Mauser 98 as a
singleshot test gun. We used a composite stock we
adapted to fit action. Weighted to 12 lbs.
Enfield in back, you can see it is longer.
And speaking of singleshots a fellow in the Yukon is
just finishing up one in a Ruger #1.
Here is one reason to like 585 calibers is bullet varieties,
this picture is only about half the bullets and slugs
we know of, and most can easily found. Ed
|
|
Back to top |
|
|
hubel585 Member
Joined: Nov 27, 2011 Posts: 178
|
Posted: Tue Apr 21, 2015 5:18 am Post subject: Re: 585 HE -- Cases In Production -- |
|
There is couple 585 videos on Swann Gunsmithing's Facebook site;
Of our 585HE in first Ruger #1, that was done in Australia.It was set up
for the poster Tankhunter on the AR big bore forums. That gun killed the
first AUS buff, killed by a 585HE, that I posted picture of above. You can
go direct to the page and click on the videos to watch the test firings..
www.facebook.com/swanbarrels/videos
Here is picture our 585HE in a Montana PH action in a MPI stock, with the
style of a CZ stock, that a guy is setting up. The stock will be finished brown
and metal finished with a Gun Kote finish...Ed
|
|
Back to top |
|
|
hubel585 Member
Joined: Nov 27, 2011 Posts: 178
|
Posted: Sun Jun 14, 2015 11:32 am Post subject: Re: 585 HE -- Cases In Production -- |
|
One of first modern era 585 caliber wildcats, since WW2, the 575 Miller Greiss Magnum,
was first mentioned in the fifties, It was made from BMG brass shortened to 2.70" long
and necked up from 50 cal to .585" actually if cut off first, it would be annealed, necked
to hold 585 bullet. Fairly sharp shoulder.
They rebated the rim quite a ways to .618" to maybe fit 98 Mauser bolt.
Maybe used a special hogged out, reworked action. Listed as
shooting 750gr bullet about 2400 fps. It holds about 150gr of ball powder under
a 750 gr bullet, maybe little less than 3" 50cal spotter case, where our 585HE holds
180gr under a 750gr'.
We made one for experimenting on a full length BMG case.With rim left same as the base
and would need a BMG or PH sized bolt and action. I'm glad to be a big bore wildcatter,
and happy to be in the company of big bore nuts, old and new. Years ago when
guys did big wildcats they took what was available, to rework, and maybe back then
they could have used the 3" spotter case, by shortening the neck,
if they could have found couple barrels full.
But it takes a lot of work to reform cases that much, with the multiple dies,
multiple annealings, and case trimming and extreme reworking of regular rifle actions,
which is why I like our 585 case, simple and straight, any regular, long bolt action,
falling block, break action, etc, a 585 good for dozen or more heavy loadings,
and moderate loads, last forever..
For our 585HE , made it a size, actually new belted size, to fit regular size, long bolt guns,
(not BMG actions)that didn't have to be used from a tripod, and could be put in a favorite,
of many, the Ruger #1, other falling blocks, without taking metal out of the feed trough.
To get the same and/or more powder space as a cut back, really shortened, BMG case
wildcatted to 585, or other short cases, we made longer case and worked with guys
with a group buy, to get a factory run made. A miracle. We thank all gun nuts for the help.
Here is picture from the great site, cartridgecollector dot net, of the M&G Mag .Ed
|
|
Back to top |
|
|
hubel585 Member
Joined: Nov 27, 2011 Posts: 178
|
Posted: Sun Jul 05, 2015 11:57 pm Post subject: Re: 585 HE -- Cases In Production -- |
|
Probably first 375 caliber cartridge made from 585HE necked down, the 375 Warlord.
Guy did a real nice job, with what looks similiar to a Weatherby style shoulder.
Kinda outdoes Weatherby & Cheytac. We have cases with no headstamps for wildcatters.
First notice of the case sent to me today off of a guys facebook.
Another fellow is planning on shortening the 585HE to maybe 2.4", for use Marlins and Henrys,
and other leverguns, redoing their 45-70s. With the belt they will have good headspace control.
Without a rim that takes up space in a levergun action, say like our rimmed 24ga FH, a 585 bore,
but which is perfect with that rim for break actions like our 24ga FH in a Magtech...Ed
|
|
Back to top |
|
|
hubel585 Member
Joined: Nov 27, 2011 Posts: 178
|
Posted: Sat Oct 17, 2015 7:43 am Post subject: Re: 585 HE -- Cases In Production -- |
|
Here is picture of 375 Warlord next to our 585 case he made it from.
He is going to make couple later necked down to 416, and 458.
There is another guy working on doing one necked down to 357 wildcat.
Here is a picture of our poster Biebs on AR, 585 HE, in a MPI stock.
He used a big Enfield action, with a fancy jeweled bolt.
We found couple other big actions for our 585, that can even feed really
long overall length loaded cases, like 4.5" long or more, if you are
using long pointed bullets for real long range target and hunting work.
One is Lawton 8000 Cheytac action, and the other is Stiller Cheytac actions
made similiar, justa newer version. Both actions come in 1.45" diameter
and a 1.60" diameter recievers.
And Vestals Gunsmithing in Virginia does great work, decent prices, has
these actions and will build you fancy 585 HEs. .. He has, working with
another guys mag box setup, setup an extra long, good working, single
stack, center feed, magazine..He has our 585 HE reamer on hand, we have
barrels, cases, and reloading dies..Ed
|
|
Back to top |
|
|
hubel585 Member
Joined: Nov 27, 2011 Posts: 178
|
Posted: Mon Nov 09, 2015 10:08 pm Post subject: Re: 585 HE -- Cases In Production -- |
|
Here is couple different setups our guys checking for our 585HE
in a long, Lawton Cheytac action. First laminated thumbhole stock.
Second in a Hogue Compstock. The action can mount a scope rail
like shown on the table in 1st picture or a receiver sight in 2nd picture.
The scope rail is a piccatiny type.
The stocks used were wide ones for REM long actions, just add recoil
block ahead of recoil inleting for the longer action, drill new screw hole
Open the stock forward to original bolt hole for longer cases and mag.
About Enfields for our case, one of my favorites, Some don't like the
sporterizing, welding bottom metal straight. Many think straightening
is a huge job needing special jigs. Easier just use one being added on for a jig
with a bolt, to weld on the straight extension, Do top weld, then cut old
extension that is under off with a thin cutting wheel, then weld bottom.
When we bolt the short piece on the one we are straightening, we grind
the short slant off so the added piece lays on there flat.
The one you cut off can be used as the top extension for the next one!!!
Just keep on building...Ed
|
|
Back to top |
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
|