| View previous topic :: View next topic |
| Author |
Message |
stovepipe
Super Member
Joined: Sep 25, 2008
Posts: 4877
Location: Pine, Az.
|
 Posted: Thu Oct 29, 2009 2:27 pm Post subject: Re: Loads for 357 mag |
 |
Them's is plinkin loads and I'd keep 'em that way till ya find how fast ya can push 'em before ya lead up that sexy lil roller all to hell and gone.
Start SLOW and work up. See smoke and smell wax and well... get the Chore-boy and Kroil out.  The key is finding a load that matches a lot of things. (BNH + PSI + curve + chamber + barrel + etc) I'd much rather under power them and go for decent groups than see how fast I can push the cast stuff. Scrubbing sucks.
I'm still didlin with my .38 cast loads in my 2" .357. 
I loaded my first rounds and the "math" said I was way under max and super safe and it turned into a 3 hour scrub fest.
God that's a nice gun Wiersy. Doubt you'll have ta use it on an intruder. Just open yer safe and shine a light in there. The relfection should blind them then whomp 'em with a bat, tie some duck decoys on and call the dogs on 'em. |
|
| Back to top |
|
 |
gelandangan
Super Member
Joined: May 07, 2006
Posts: 6397
Location: Sydney Australia
|
|
| Back to top |
|
|
wiersy111
Super Member
Joined: May 13, 2009
Posts: 2376
Location: Central Minnesota
|
| Posted: Thu Oct 29, 2009 3:30 pm Post subject: Re: Loads for 357 mag |
|
I like evil.
For right now I'm only loading 6 at a time starting low just to see what that roller likes to eat. Of course with the rain lately it's hard to get to the range. I'm not really into scrubbing.
_________________
A veteran is someone who, at one point in his life wrote a blank check made payable to "The United States of America " for an amount of "up to and including my life."
US ARMY RETIRED
The original point and click interface was a Smith & Wesson.
Being "Over the Hill" is much better then being under it! |
|
| Back to top |
|
|
chambered221
Super Member
Joined: Aug 17, 2007
Posts: 3455
Location: Lost for good !!!
|
| Posted: Thu Oct 29, 2009 3:38 pm Post subject: Re: Loads for 357 mag |
|
You loading 357 mag cases or 38 specials ???
_________________
Ask as many people needed, sooner or later your question will be answered the way you want it answered !!!
A free people ought not only to be armed and disciplined, but they should have sufficient arms and ammunition to maintain a status of independence from any who might attempt to abuse them, which would include their own government.
~George Washington |
|
| Back to top |
|
|
wiersy111
Super Member
Joined: May 13, 2009
Posts: 2376
Location: Central Minnesota
|
| Posted: Thu Oct 29, 2009 3:45 pm Post subject: Re: Loads for 357 mag |
|
I've got both but I'm concentrating on working with the 357 mags right now.
_________________
A veteran is someone who, at one point in his life wrote a blank check made payable to "The United States of America " for an amount of "up to and including my life."
US ARMY RETIRED
The original point and click interface was a Smith & Wesson.
Being "Over the Hill" is much better then being under it! |
|
| Back to top |
|
|
chambered221
Super Member
Joined: Aug 17, 2007
Posts: 3455
Location: Lost for good !!!
|
| Posted: Thu Oct 29, 2009 3:58 pm Post subject: Re: Loads for 357 mag |
|
Hodgdon Basic Manual
357 Mag
Winchester SPM
158gr XTP
Titegroup 6.1 Max
_________________
Ask as many people needed, sooner or later your question will be answered the way you want it answered !!!
A free people ought not only to be armed and disciplined, but they should have sufficient arms and ammunition to maintain a status of independence from any who might attempt to abuse them, which would include their own government.
~George Washington |
|
| Back to top |
|
|
wiersy111
Super Member
Joined: May 13, 2009
Posts: 2376
Location: Central Minnesota
|
| Posted: Thu Oct 29, 2009 4:08 pm Post subject: Re: Loads for 357 mag |
|
Yep I found that last night and printed out the loads from there.
_________________
A veteran is someone who, at one point in his life wrote a blank check made payable to "The United States of America " for an amount of "up to and including my life."
US ARMY RETIRED
The original point and click interface was a Smith & Wesson.
Being "Over the Hill" is much better then being under it! |
|
| Back to top |
|
|
stovepipe
Super Member
Joined: Sep 25, 2008
Posts: 4877
Location: Pine, Az.
|
| Posted: Fri Oct 30, 2009 7:44 am Post subject: Re: Loads for 357 mag |
|
Those are MAX for the .357 case using a JHP! DANGER! 
Shoot plinkers as much as ya can and keep that lil' beauty tight. A steady diet of full house will loosen her teeth pretty quick.  Full house every so often is no problem.
Load up some reduced mellow START loads in the .357 case at around 750 FPS for your cast bullets.
I will NOT recomend loads, published or otherwise, for obvious reasons, esp to friends.
Using the .357 case for plinkers cuts down on scrubbing time too as there is 95% less chamber fouling. Ya prolly already know all this but...
That is such a nice shooter! 
I love the feel of those stocks shooting mellow loads.
Double-tap's are fun too! |
|
| Back to top |
|
|
chambered221
Super Member
Joined: Aug 17, 2007
Posts: 3455
Location: Lost for good !!!
|
| Posted: Fri Oct 30, 2009 10:32 am Post subject: Re: Loads for 357 mag |
|
Yes sir that is max just as I stated!!! It was only a reference for the powder/load he's working on.
 I would rather scrub the chambers.........opposed to flirting with special loads in a mag case !!!
_________________
Ask as many people needed, sooner or later your question will be answered the way you want it answered !!!
A free people ought not only to be armed and disciplined, but they should have sufficient arms and ammunition to maintain a status of independence from any who might attempt to abuse them, which would include their own government.
~George Washington |
|
| Back to top |
|
|
stovepipe
Super Member
Joined: Sep 25, 2008
Posts: 4877
Location: Pine, Az.
|
| Posted: Fri Oct 30, 2009 10:50 am Post subject: Re: Loads for 357 mag |
|
It was also for a JHP, not a lead RN -gc.
The regular Hodgdon manual, not that POS quick referance one on the website, has reduced loads in it for lead around 800 +/- FPS or so... use a HV midspeed to start. Has 'em for my .44m too.
And I see your point regarding too much space in the case as that is an often overlooked issue. Never actaully seen the resulting rumored KB but I've heard about those concerns, per say.
|
|
| Back to top |
|
|
wiersy111
Super Member
Joined: May 13, 2009
Posts: 2376
Location: Central Minnesota
|
| Posted: Fri Oct 30, 2009 4:29 pm Post subject: Re: Loads for 357 mag |
|
I'm not to excited about hot loads in the 357, I just don't want something to light that it is going to be miserable to clean. So far I haven't had any leading with the Dardas bullets.
_________________
A veteran is someone who, at one point in his life wrote a blank check made payable to "The United States of America " for an amount of "up to and including my life."
US ARMY RETIRED
The original point and click interface was a Smith & Wesson.
Being "Over the Hill" is much better then being under it! |
|
| Back to top |
|
|
stovepipe
Super Member
Joined: Sep 25, 2008
Posts: 4877
Location: Pine, Az.
|
| Posted: Mon Nov 02, 2009 10:14 am Post subject: Re: Loads for 357 mag |
|
I may just try them next time or go back to plated. X-Treme's plated one's I can push pretty good but still much less than full house.
Plus, with well tumbled brass the X-Treme's make really pretty, shiny rounds.  |
|
| Back to top |
|
|
wiersy111
Super Member
Joined: May 13, 2009
Posts: 2376
Location: Central Minnesota
|
| Posted: Mon Nov 02, 2009 8:29 pm Post subject: Re: Loads for 357 mag |
|
I had a good test load the other night it wasn't the wimpy pop and not a heavy load either so I'm gonna try some more of them.
_________________
A veteran is someone who, at one point in his life wrote a blank check made payable to "The United States of America " for an amount of "up to and including my life."
US ARMY RETIRED
The original point and click interface was a Smith & Wesson.
Being "Over the Hill" is much better then being under it! |
|
| Back to top |
|
|
stovepipe
Super Member
Joined: Sep 25, 2008
Posts: 4877
Location: Pine, Az.
|
| Posted: Tue Nov 03, 2009 8:23 am Post subject: Re: Loads for 357 mag |
|
Argh...I got 2000 rounds of these other butter-bullets I gotta shoot up in .38 and .44.
Good on ya for finding a fun load that don't lead it up like a pencil.
|
|
| Back to top |
|
|
wiersy111
Super Member
Joined: May 13, 2009
Posts: 2376
Location: Central Minnesota
|
| Posted: Tue Nov 03, 2009 7:40 pm Post subject: Re: Loads for 357 mag |
|
Sounds like a little scrubbing in your future.
_________________
A veteran is someone who, at one point in his life wrote a blank check made payable to "The United States of America " for an amount of "up to and including my life."
US ARMY RETIRED
The original point and click interface was a Smith & Wesson.
Being "Over the Hill" is much better then being under it! |
|
| Back to top |
|
|
|
|
Latest: IPutMoInYoA
New Today: 0
New Yesterday: 0
Overall: 13131
People Online:
Members: 0
Visitors: 210
Total: 212
Visitors:
BOT:
Forum FAQ
Search
Log in to check your private messages
Login
