Triple Shock Data

Northern Canuck · Posted: Thu Nov 02, 2006 6:56 pm Post subject: Triple Shock Data

I am trying to find data to reload 165 grain Triple Shock bullets in my 30-06 but am having trouble getting it. On the Barnes web page they say to use the X bullet data but the pressures will more than likely be lower yada yada. Has anyone seen actual data for the Triple Shock?? I went to buy the newest Barnes manual, opened it up and nothing.
Mad

Handloader · Posted: Thu Nov 02, 2006 9:14 pm Post subject: Re: Triple Shock Data

Following Barnes recommendation is the best way in which to develop loads for your rifle with the TSX. Because of the relief grooves, the TSX will have less pressure, in my experience. In fact, as you develop your loads you will be surprised at how much added velocity you will gain with this bullet. Too, inside the bullet box should be instructions on seating depth that will optomize accuracy.

Barnes #4 should be out with a few months (I hope). That will contain TSX data. The delayed release suggests it might have MRX data as well.

Arizona Hunter · Member Joined: Jul 22, 2006 Posts: 275

Hi Canuck,

I have the complete 30.06 TSX load data as received in an email from Todd at Barnes. If you would like it, just let me know which address to send it to.

AZ

Northern Canuck · Posted: Fri Nov 03, 2006 6:56 pm Post subject: Re: Triple Shock Data

Thanks.
I went on the web and emailed Barnes last night. They sent me all the data along with the load data for the 180 gr MRX. Thanks anyways.