View previous topic :: View next topic |
Author |
Message |
sagebrushsniper Member
Joined: Feb 22, 2008 Posts: 31 Location: central wyoming
|
Posted: Mon Feb 25, 2008 9:07 pm Post subject: 6x.223 or 6x45 does anybody lod for this |
|
I'm having a Ruger #3 rebored to 6x45 and am just starting to get ready to neck up the brass.
_________________ Payback is hell with no due date. If it aint' important enough to wait to do till tommorow it ain't important! |
|
Back to top |
|
|
SwampFox Super Member
Joined: Jul 15, 2005 Posts: 1040 Location: Destin, Florida
|
Posted: Tue Feb 26, 2008 12:05 pm Post subject: Re: 6x.223 or 6x45 does anybody lod for this |
|
Sagebrush,
I reloaded for the 6x47 for a short time then sold the gun that I built for it, the XP-100. I looked around and could not find my data. However, there is a ton of stuff on the net for the 6x45. I think there is some stuff in our data base here on site.
By the by, the 6x45 is based on the 222 Remington and the 6x47 is based on the 222 Rem Mag. The 223 version you run into normally is the 6mmTCU. The 223 version is slightly larger than the 222 RM version which is larger than the 222 version. All are very accurate.
Best
Ed
_________________ The inherent vice of capitalism is the unequal sharing of the blessings. The inherent blessing of socialism is the equal sharing of misery.
-Winston Churchill |
|
Back to top |
|
|
terry264 Member
Joined: Apr 02, 2005 Posts: 85 Location: Eastern-North Central West Virginia
|
Posted: Tue Feb 26, 2008 12:51 pm Post subject: Re: 6x.223 or 6x45 does anybody lod for this |
|
sagebrushsniper, pm sent with load data, hope this helps, Terry.
|
|
Back to top |
|
|
terry264 Member
Joined: Apr 02, 2005 Posts: 85 Location: Eastern-North Central West Virginia
|
Posted: Tue Feb 26, 2008 12:56 pm Post subject: Re: 6x.223 or 6x45 does anybody lod for this |
|
me again, also check reloadersnest.com, they show 5 loads for the 6x45
|
|
Back to top |
|
|
chambered221 Super Member
Joined: Aug 17, 2007 Posts: 3455 Location: Lost for good !!!
|
Posted: Tue Feb 26, 2008 5:35 pm Post subject: Re: 6x.223 or 6x45 does anybody lod for this |
|
swampfox, thanks for the cartridge info. I often see these listed along with the 30X44 and 30X47.
Can you give more background info on them?
_________________ Ask as many people needed, sooner or later your question will be answered the way you want it answered !!!
A free people ought not only to be armed and disciplined, but they should have sufficient arms and ammunition to maintain a status of independence from any who might attempt to abuse them, which would include their own government.
~George Washington |
|
Back to top |
|
|
sagebrushsniper Member
Joined: Feb 22, 2008 Posts: 31 Location: central wyoming
|
Posted: Tue Feb 26, 2008 6:27 pm Post subject: Re: 6x.223 or 6x45 does anybody lod for this |
|
Thanks for the info. Swampfox , the 6x223 is just that. I have been using the Lee .223 trim pilot until I get a custom for the 6. Sierra in their new manual has the 6 listed also, but it is always nice to get all the info thats out there especally from someone who has done it. Tks again
_________________ Payback is hell with no due date. If it aint' important enough to wait to do till tommorow it ain't important! |
|
Back to top |
|
|
sagebrushsniper Member
Joined: Feb 22, 2008 Posts: 31 Location: central wyoming
|
Posted: Tue Feb 26, 2008 6:30 pm Post subject: Re: 6x.223 or 6x45 does anybody lod for this |
|
Terry thanks! Shoot straight and no prisoners! If there are any doggers out there check out WWW.Prairiedogposse.com
_________________ Payback is hell with no due date. If it aint' important enough to wait to do till tommorow it ain't important! |
|
Back to top |
|
|
|