View previous topic :: View next topic |
Author |
Message |
Gil Martin Super Member
Joined: Jan 28, 2005 Posts: 1837 Location: Schnecksville, PA
|
Posted: Thu Mar 29, 2018 3:54 pm Post subject: Stuck case in resizing die |
|
I was loading some .30-06 rounds today and stuck the first case in the resizing die. I quickly grabbed the RCBS Stuck Case Remover tool. It has been some years since I stuck a case in a resizing die and I forgot how to use it. After a bit of trial and error I got things sorted out, removed the stuck case and reloaded the rest of the .30-06 cases. It is humbling to trip over your own feet in this manner, but it happens. Take care. All the best...
Gil
_________________ Gil |
|
Back to top |
|
|
Pumpkinslinger Super Member
Joined: Sep 22, 2007 Posts: 5002 Location: NC foothills
|
Posted: Thu Mar 29, 2018 4:15 pm Post subject: Re: Stuck case in resizing die |
|
Been there Gil. The first time I tried Hornady One Shot I didn't wait long enough to try sizing some .220 Swifts. Got one stuck GOOD. I rig a case remover up with a wrench socket and some washers, etc. I bought a tool immediately afterwards.
_________________ Mike
"I ain't no better than anybody else, and there ain't nobody better than me!" Ma Kettle |
|
Back to top |
|
|
slimjim Super Member
Joined: May 16, 2009 Posts: 8314 Location: Fort Worth TX
|
Posted: Thu Mar 29, 2018 7:24 pm Post subject: Re: Stuck case in resizing die |
|
Gil, at least you were prepared. It is rather a scary situation when this happens for a beginner. What lube were you using?
_________________ "To anger a conservative, lie to him. To anger a liberal, tell him the truth." - Theodore Roosevelt
"The world is a dangerous place to live; not because of the people who are evil, but because of the people who don't do anything about it." - Albert Einstein |
|
Back to top |
|
|
RePete Super Member
Joined: Aug 15, 2005 Posts: 1035 Location: Gods Country
|
Posted: Fri Mar 30, 2018 2:40 am Post subject: Re: Stuck case in resizing die |
|
I, too , have been there.
I assembled my own remover using tools I already had. They are still in the Erinmore tin.
_________________ Proud member of the WTFDTSG Club.
Stercus Accidit = Sh*t Happens in Latin.
Nice try = You Suck spelled different.
My parents spanked me as a child. As a result, I now suffer from a psychological condition known as RESPECT FOR OTHERS. |
|
Back to top |
|
|
Gil Martin Super Member
Joined: Jan 28, 2005 Posts: 1837 Location: Schnecksville, PA
|
Posted: Fri Mar 30, 2018 2:41 pm Post subject: Re: Stuck case in resizing die |
|
slimjim,
I was using RCBS resizing lube on a pad and had rolled the cases back and forth several times. The case appeared to be properly lubed and was tight going into the die. When I lowered the press ram the case rim came off in the shell holder. All the best...
Gil
_________________ Gil |
|
Back to top |
|
|
slimjim Super Member
Joined: May 16, 2009 Posts: 8314 Location: Fort Worth TX
|
Posted: Fri Mar 30, 2018 5:13 pm Post subject: Re: Stuck case in resizing die |
|
I now use Imperial wax and have never had an issue with it. It was recommended to me after I had a stuck case with a spray lube.
_________________ "To anger a conservative, lie to him. To anger a liberal, tell him the truth." - Theodore Roosevelt
"The world is a dangerous place to live; not because of the people who are evil, but because of the people who don't do anything about it." - Albert Einstein |
|
Back to top |
|
|
English Mike Super Member
Joined: Jan 08, 2007 Posts: 1709 Location: Whitehaven, Cumbria, UK
|
Posted: Sat Mar 31, 2018 3:56 pm Post subject: Re: Stuck case in resizing die |
|
Getting one out of a chamber without the correct tools is even more fun...
Description: |
|
Filesize: |
159.38 KB |
Viewed: |
6347 Time(s) |
|
|
|
Back to top |
|
|
Vince Site Admin
Joined: May 25, 2005 Posts: 15717 Location: Brisbane AUSTRALIA
|
Posted: Sat Mar 31, 2018 4:12 pm Post subject: Re: Stuck case in resizing die |
|
Ah, the voice of experience mate. Adapt and overcome.
On the strength of this thread, I am going to start sniffing around for a ex mil ruptured cartridge case extractor...a great piece of kit that is easy to use and is perfect for the job.
I’ve never had a case get stuck in a die, and as I use Imperial Sizing Wax now I don’t anticipate it happening...but then again there is always Murphy’s Law.
_________________ Cheers, Vince
Illegitimi non carborundum
(Never let the bastards grind you down)
Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God.
"Nulla Si Fa Senza Volonta."
(Without Commitment, Nothing Gets Done) |
|
Back to top |
|
|
English Mike Super Member
Joined: Jan 08, 2007 Posts: 1709 Location: Whitehaven, Cumbria, UK
|
Posted: Sat Mar 31, 2018 5:41 pm Post subject: Re: Stuck case in resizing die |
|
I actually have a complete RCBS stuck case removal kit but in this instance it was 200 miles away, so some allthread, nuts & an errant piece of bar were pressed into use.
I was surprised how solidly stuck the damn' case was too.
|
|
Back to top |
|
|
slimjim Super Member
Joined: May 16, 2009 Posts: 8314 Location: Fort Worth TX
|
Posted: Sat Mar 31, 2018 6:28 pm Post subject: Re: Stuck case in resizing die |
|
I had a stuck bullet in my AR one. I filled the barrel with water, capped the openings, and stuck it in the freezer.
_________________ "To anger a conservative, lie to him. To anger a liberal, tell him the truth." - Theodore Roosevelt
"The world is a dangerous place to live; not because of the people who are evil, but because of the people who don't do anything about it." - Albert Einstein |
|
Back to top |
|
|
Elvis Super Member
Joined: Jul 27, 2008 Posts: 9253 Location: south island New Zealand
|
Posted: Mon Apr 02, 2018 1:01 am Post subject: Re: Stuck case in resizing die |
|
I remember that one slimjim.....kept us all entertained for days....
lee lube is the cause of many a headache ....I hate the crap with a vengence,yet have great faith in all thier other products... for me its good old vasoline on fingertips for body of case and quick dip in powdered graphite in jar lid of #7 shot for case necks.
_________________ You shot it You pluck it !
Them who eats the most duck eats the most feathers! |
|
Back to top |
|
|
RePete Super Member
Joined: Aug 15, 2005 Posts: 1035 Location: Gods Country
|
Posted: Mon Apr 02, 2018 3:14 am Post subject: Re: Stuck case in resizing die |
|
That's funny Elvis, 'cause I love the Lee lube. I had one stuck case because I didn't put enough on.
When I load .223, I mix it with rubbing alcohol in a pump bottle and spray the cases, that are on an old cookie sheet, and then resize.
_________________ Proud member of the WTFDTSG Club.
Stercus Accidit = Sh*t Happens in Latin.
Nice try = You Suck spelled different.
My parents spanked me as a child. As a result, I now suffer from a psychological condition known as RESPECT FOR OTHERS. |
|
Back to top |
|
|
hunterjoe21 Super Member
Joined: Mar 30, 2007 Posts: 1486 Location: Miles City, Montana
|
Posted: Sun Sep 16, 2018 11:38 am Post subject: Re: Stuck case in resizing die |
|
Got my first ever case stuck in a die the other night. I bought the RCBS removal kit years ago hoping to never need it. I got the case out of the die body (after a little head scratchin' and cussin'), but the expander was still inside the case. I ended up unscrewing the expander and cutting the case open with a Dremel to get it out.
_________________ My 1911 is more effective than your 911. |
|
Back to top |
|
|
Bushmaster Super Member
Joined: Jun 12, 2005 Posts: 11393 Location: Ava, Missouri
|
Posted: Mon Sep 17, 2018 9:06 am Post subject: Re: Stuck case in resizing die |
|
I used the RCBS lube pad for years with no problems. Friend hooked me up with some pure lanolin. Stuff works great.
_________________ I have one nerve left and yer standin' on it...
DEMOCRACY Two wolves and one sheep voting on what to have for lunch...
LIBERTY A well armed sheep contesting the outcome of the vote... |
|
Back to top |
|
|
Bushmaster Super Member
Joined: Jun 12, 2005 Posts: 11393 Location: Ava, Missouri
|
Posted: Wed Sep 19, 2018 9:42 am Post subject: Re: Stuck case in resizing die |
|
Oh. And a comment on One Shot. I tried it and had cases that indicated that they were about to get stuck in my dies. I did, however, found out that One Shot makes a good anti-squeek lube for rocking chairs and recliners.
_________________ I have one nerve left and yer standin' on it...
DEMOCRACY Two wolves and one sheep voting on what to have for lunch...
LIBERTY A well armed sheep contesting the outcome of the vote... |
|
Back to top |
|
|
|