View previous topic :: View next topic |
Author |
Message |
Ominivision1 Super Member
Joined: Sep 20, 2010 Posts: 2984 Location: Iowa
|
Posted: Mon Sep 26, 2011 12:20 pm Post subject: Went to an Auction this Weekend. |
|
Picked up a shotgun and 2 small revolvers this weekend at an auction.
The shotgun is a model 240 Stevens 410 o/u shotgun 3" chambers with 2 hammers, 2 triggers and a broken stock. This is the first time I've seen a model 240 stevens shotgun and the fore end part is ok, the rear stock was broken pretty good as the auctioneer told me they were made out of Tenite. So now I have to try and find a replacement stock.
The 2 revolvers are 1 is a 38cal BP with the name FOREHAND ARMS CO. WORCESTER MASS.U.S / PAT'D DEC.7 '86 & JAN.11.87 Revolver was nickel plated but is flaking off. I'm still trying to find info on this gun.
The last gun was a 22 short revolver that was made by a german company that starts with the name "rohm". This thing looks like a toy gun.
I pick them up on Wednesday.
_________________ Regards
Limitations are but boundaries created inside our minds. |
|
Back to top |
|
|
Suzanne Super Member
Joined: Jun 27, 2009 Posts: 3323 Location: Eugene, Oregon
|
Posted: Mon Sep 26, 2011 1:52 pm Post subject: Re: Went to an Auction this Weekend. |
|
Photos please!! Those sound interesting, broken stock might be a fun project, what the heck is Tenite (just looked it up...thermoplastic cellulostic stuffin stuff) Maybe you could make a wooden replacement, or use some epoxy. I guess nickel plating could be re-done, but you'd probably have to remove the remainder of what's on it. This should be fun, what was the final bid? Come-on do tell
Here's one on GunBroker in 32S&W
Suz
_________________ May the moon keep you centered,
May the sun keep you dancing,
And the stars shed light on your dreams. |
|
Back to top |
|
|
Elvis Super Member
Joined: Jul 27, 2008 Posts: 9253 Location: south island New Zealand
|
Posted: Mon Sep 26, 2011 3:28 pm Post subject: Re: Went to an Auction this Weekend. |
|
u/o .410 sounds good but 2 hammers has got me puzzled Ive never seen an u/o with hammers? photos please.have you got kneed it in stores over there? it comes in a canister about an inch round and foot long you kneed it then mould it to shape and it sets like concrete. the adds for it had a hammer made out of it. I put some on a stock to raise it and it was VERY tough stuff. it may do the job as a last resort.
_________________ You shot it You pluck it !
Them who eats the most duck eats the most feathers! |
|
Back to top |
|
|
Ominivision1 Super Member
Joined: Sep 20, 2010 Posts: 2984 Location: Iowa
|
Posted: Mon Sep 26, 2011 3:48 pm Post subject: Re: Went to an Auction this Weekend. |
|
Hey Suz and Elvis, as soon as I pickup the guns on Wednesday morning (maybe I'll take 4 hours off tomorrow and pick them up) I will post pictures.
Same here SUz, just found out that it was "Kodak" that invented the tenite (for a camera maybe?) and stevens used this on this model. Yes Suz thats the gun I won, but it's 38 caliber. And Suz, just for you, I paid $48 for all 3 guns as nobody was bidding but me.
Yup Elvis it does have 2 hammers, when I looked at the shotgun, the stock was completely shattered at least half of it. But before the auction started, I looked at the stevens and opened up the shotgun and barrel was clean and both extractors were working.
_________________ Regards
Limitations are but boundaries created inside our minds. |
|
Back to top |
|
|
Elvis Super Member
Joined: Jul 27, 2008 Posts: 9253 Location: south island New Zealand
|
Posted: Mon Sep 26, 2011 4:16 pm Post subject: Re: Went to an Auction this Weekend. |
|
sounds like a real bargain. look forward to see how it looks before and after youve fixed it up.
_________________ You shot it You pluck it !
Them who eats the most duck eats the most feathers! |
|
Back to top |
|
|
Aloysius Super Member
Joined: Nov 03, 2009 Posts: 2440 Location: B., Belgium
|
Posted: Tue Sep 27, 2011 12:13 am Post subject: Re: Went to an Auction this Weekend. |
|
Omi, better check the timing on that Rohm. I think I have something like that somewhere, tried it once and it made keyholes at 5 m! Pull the hammer and check how much play the cylinder still has... maybe 1 day when I have lot's af time and nothing to do, I will try to make another part that's blocking the cylinder, something that fits like it should from the beginning. But on the other hand: the rawmaterials used on such a revolver are not worth to spend the extra work.
And for that stock: maybe try the stock of another Stevens? I got such an Browning Auto 5 in cal 20 with a broken stock and I tried the stock of an Auto 5 in cal 12: bingo! Now I know: forehand doesnt fit, cal 12, 16 and 20 have different diameters, stock is the same if it's about the same model.
|
|
Back to top |
|
|
stovepipe Super Member
Joined: Sep 25, 2008 Posts: 4877 Location: Pine, Az.
|
Posted: Tue Sep 27, 2011 9:59 am Post subject: Re: Went to an Auction this Weekend. |
|
Getta butt made fer that rabbit eared small bore and post some pics man!!!! What a killer pop gun!
|
|
Back to top |
|
|
SingleShotLover Super Member
Joined: Dec 26, 2007 Posts: 1005 Location: Illinois
|
Posted: Wed Sep 28, 2011 5:30 am Post subject: Re: Went to an Auction this Weekend. |
|
FOREHAND ARMS CO. evidently was bought out by Hopkins and Allen. I am guessing that it is .38 S&W (not Special). Do a Google search on FOREHAND ARMS CO. Seems to be a fair amount of info out there.
Rohm (also branded as RG) was a German company that made revolvers during the '60s and '70s which many point to as the reason the term "Saturday Night Specials" was invented. Their quality was pretty much all over the board. Some were OK, others were junk. Timing, chamber dimensions and alignment were often issues.
_________________ If you can't hit it with one, you probably can't with two either!
The biggest problem with a closed mind is that it never seems to come with a closed mouth.
SSL |
|
Back to top |
|
|
Ominivision1 Super Member
Joined: Sep 20, 2010 Posts: 2984 Location: Iowa
|
Posted: Wed Sep 28, 2011 10:51 am Post subject: Re: Went to an Auction this Weekend. |
|
The stevens is at the smith getting checked out and he said he may just have a stock for it. He thought the overall condition was very good on the 410. He looked at the rohm 22 short revolver and laughed, I told him it came with the package. After a quick clean and step outside to his backyard range, the little 22 managed 3" groups at 10' for 6 shots off a rest. The 38 will never be shot as it is worn and will probably buy some chemicals to get the flaky nickel plating off and display it.
Description: |
|
Filesize: |
42.33 KB |
Viewed: |
7546 Time(s) |
|
Description: |
|
Filesize: |
29.26 KB |
Viewed: |
7546 Time(s) |
|
Description: |
|
Filesize: |
40.56 KB |
Viewed: |
7546 Time(s) |
|
_________________ Regards
Limitations are but boundaries created inside our minds. |
|
Back to top |
|
|
Ominivision1 Super Member
Joined: Sep 20, 2010 Posts: 2984 Location: Iowa
|
Posted: Wed Sep 28, 2011 10:52 am Post subject: Re: Went to an Auction this Weekend. |
|
One more pic.
Description: |
|
Filesize: |
43.09 KB |
Viewed: |
7545 Time(s) |
|
_________________ Regards
Limitations are but boundaries created inside our minds. |
|
Back to top |
|
|
stovepipe Super Member
Joined: Sep 25, 2008 Posts: 4877 Location: Pine, Az.
|
Posted: Wed Sep 28, 2011 12:11 pm Post subject: Re: Went to an Auction this Weekend. |
|
OH man that midget bore is gonna be such a sweet shooter...buff the tubes and get a stock and take that thing hunting....man what a neat thing!
I WANT A DOUBLE 410!
|
|
Back to top |
|
|
PaulS Super Member
Joined: Feb 18, 2006 Posts: 4330 Location: South-Eastern Washington - the State
|
|
Back to top |
|
|
stovepipe Super Member
Joined: Sep 25, 2008 Posts: 4877 Location: Pine, Az.
|
Posted: Thu Sep 29, 2011 6:52 am Post subject: Re: Went to an Auction this Weekend. |
|
|
|
Back to top |
|
|
Bushmaster Super Member
Joined: Jun 12, 2005 Posts: 11391 Location: Ava, Missouri
|
Posted: Thu Sep 29, 2011 7:17 am Post subject: Re: Went to an Auction this Weekend. |
|
An over & under with side by side hammers. Now that is something.
_________________ I have one nerve left and yer standin' on it...
DEMOCRACY Two wolves and one sheep voting on what to have for lunch...
LIBERTY A well armed sheep contesting the outcome of the vote... |
|
Back to top |
|
|
stovepipe Super Member
Joined: Sep 25, 2008 Posts: 4877 Location: Pine, Az.
|
Posted: Thu Sep 29, 2011 7:26 am Post subject: Re: Went to an Auction this Weekend. |
|
Mornin' boss, two cups in, picklin' hooves, shovlin' stalls, buckin' bales....gettin' ready for opening day, 19 more to go!
|
|
Back to top |
|
|
|