New Rifle Builds...

Azar · Member Joined: Jan 04, 2010 Posts: 275 Location: Utah

Quote::

The gun used on Mr. Schaffer's New Zealand hunt was T/C Encore 209X50 that he sent to me for accurizing. When I received the gun, Mr. Schaffer told me that the best it would do was 3" at 100 yards, and that was on a "good day"! After I got my hands on it, did my work on it and shipped it back, I got a phone call from Mr. Schaffer, and he told me that his gun now shot under an inch at 100 yards, and most all groups were one-ragged-hole! He now had confidence in this gun to take it hunting, and these are his results

If you don't mind my asking, do you recall what changes you made to his firearm that fixed the issues? Just curious.

Beautiful pictures of you work. I notice you do a lot of bull barrels and heavy contours. It looks like a lot of your rifles are meant to be shot from prone or "bean field" rifles. Do you do much work on lighter profile rifles like a mountain rifle?

Thanks for sharing.

Deer Sniper · Super Member Joined: Apr 26, 2007 Posts: 539

Azar,

even though it's been a couple of years, I remember the work I did very well. I do the same work to a lot of muzzle loaders every year...

Elvis · Posted: Sun Jul 29, 2018 1:04 am Post subject: Re: New Rifle Builds...

any issues poping up with encore stocks breaking through grip with the new .50 cals??????? seen two recently and thought you be the man to ask.

Deer Sniper · Super Member Joined: Apr 26, 2007 Posts: 539

The first couple of years after T/C brought out the Encore, I repaired literally hundreds of busted stocks!

With the plastic/nylon stocks, no problems!

Laminated stocks, no problems!

Even now, probably a dozen times a year, maybe more, I still see walnut stocks that are busted in two in or behind the grip area.

Azar · Member Joined: Jan 04, 2010 Posts: 275 Location: Utah

Deer Sniper wrote:

Azar,

even though it's been a couple of years, I remember the work I did very well. I do the same work to a lot of muzzle loaders every year...

Trigger Job - 2 1/2 pounds

Oversize hinge pin

Cut off QLA and recrown with a tapered target crown

Modify scope base to 5-screws and add a pressure screw on the front of the base to keep it from flexing downward during recoil

Modified the forend "ears" so they do not contact the receiver

Installed neoprene washers between the barrel and forend to help deaden vibrations during firing

Thank you!

The rifles I build are per customer request...

I actually build a lot of slim profile mountain rifles.

I just finished a Remington 700 build in 7mm TCU for a lady out of Texas. Fully decked out with scope, this rig weighed in at less than 6 pounds!

The last 280 Ackley Improved I built went to Colorado, and scoped weight was exactly 7 pounds 6 ounces!

Thanks for the reply. I find this kind of work fascinating, even if it's beyond my abilities.

Elvis · Posted: Tue Jul 31, 2018 12:12 am Post subject: Re: New Rifle Builds...

thanks for that Mate...will pass it on...looking at that sexy green n gold build I can see its a heck of a lot stronger design than the other sort that have massive kink in them.

Elvis · Posted: Tue Jul 31, 2018 2:12 am Post subject: Re: New Rifle Builds...

hmmmm seems the laminated ones arent immune either

Deer Sniper · Super Member Joined: Apr 26, 2007 Posts: 539

Wow!!! I have never seen that on a laminated stock before. That is downright scary looking! Any idea on the caliber? Seems like it would have taken a LOT of pressure to bust a laminate like that.

dhc4ever · Posted: Tue Jul 31, 2018 2:44 pm Post subject: Re: New Rifle Builds...

A very strange mode of failure for laminated wood indeed.
The only way to manage that would be to have all the laminate layer grain running in the same direction, not crosswise to each other.
Or its a .900 tyranosuarus..............

slimjim · Posted: Tue Jul 31, 2018 3:51 pm Post subject: Re: New Rifle Builds...

I wonder if they tried to use the butt as a hammer?

Pumpkinslinger · Posted: Tue Jul 31, 2018 4:26 pm Post subject: Re: New Rifle Builds...

Yeah, I'm kinda wondering if that got cracked by some cause other than recoil.

Vince · Posted: Tue Jul 31, 2018 5:54 pm Post subject: Re: New Rifle Builds...

Looking at the pic I thought that the stock had taken a hit on the side, but enlarging the pic I can see it’s the tip of a screw...probably to hold it in one piece for a pic. It would be interesting to see more pics of the broken stock.

Elvis · Posted: Wed Aug 01, 2018 12:59 am Post subject: Re: New Rifle Builds...

50 cal...... 500 s&w to be eggzact...... so a fairly potent round to be sure,he bought it 2nd hand and that was result after 2 shots!!!!!!!

huntin1 · Rookie Member Joined: Sep 09, 2018 Posts: 3

I did my first AR build this past spring.

Aero Precision stripped lower
Rise Armament RA-140 trigger
Seekins LPK and adj. low profile gas block
DS Arms 6 position buffer tube
DPMS buffer/spring
BCM upper assembly, charging handle and pistol grip
Stag Arms BCG
Brownells B-TAC 16" 1 in 7" 5.56 NATO, socom profile barrel
Magpul MOE stock
Troy 13" Alpha Rail Handguard

Deer Sniper · Super Member Joined: Apr 26, 2007 Posts: 539

Nice looking build!

What bullets are you going to run with that 1-7" twist rate barrel?