View previous topic :: View next topic |
Author |
Message |
shrpshtrjoe Super Red Neck Member
Joined: Jan 26, 2005 Posts: 2965 Location: Maryland
|
Posted: Sat Feb 05, 2005 10:51 am Post subject: nosler accubond |
|
Was wondering what everybodys take was on the nosler accubond. I was thinking of trying the 7mm 140gr. Thought someone could give me results they have had with them thanx.
shrpshtrjoe
|
|
Back to top |
|
|
Reuben Rookie Member
Joined: Feb 01, 2005 Posts: 5 Location: SW Alaska (Schoolong at WSU)
|
Posted: Sun Feb 06, 2005 6:32 pm Post subject: Re: nosler accubond |
|
Well I haven't tried the accubonds, but shoot the swift sciroccos. The bullets are great and always bring home the meat. They are easy to load accurate and make quick kills.
Take care Reuben
|
|
Back to top |
|
|
canadamoose1 Rookie Member
Joined: Feb 07, 2005 Posts: 5
|
Posted: Tue Feb 08, 2005 1:43 pm Post subject: Re: nosler accubond |
|
I have used the 140 accubond in my .270 Sendero for the past two years. Shoots as well or better than the Nosler Ballistic Tip. Have got two mulies and two moose. Recouvered two of the bullets. Weighted 93.8 gr amd 92.4 gr.
Have just made up a load for my partners 7mm mag with the 160 gr Accubonds and they group about 1" and less depending on how I'm shooting that day.
Can't say enought good about them. The only way to fly in my books
Didn't know they made a 140 gr. in 7 mm.
|
|
Back to top |
|
|
300winnie Rookie Member
Joined: Feb 01, 2005 Posts: 10
|
Posted: Wed Feb 09, 2005 4:13 am Post subject: Re: nosler accubond |
|
I absolutely love the new Nosler Accubonds. When they came out I wanted to load them in my .300 Winchester Magnum, but they only came out with the 200 grainer that year. I decided to try it anyway. Am I glad I did. After some workup I found a load that drove bullets m.o.a. on a consistent basis with an average velocity for 10 shots of 3038 fps.
I shot a bull elk this past fall at 50 yards. The shot I was presented made me shoot him on the point of the shoulder as he quartered towards me. That bullet went through the shoulder joint, reducing it to wet bone dust and continued on through the ribs (quarter size entry) and took out lung to expire the animal. As I was dressing the bull out I found the bullet in the body cavity. It weighed 104 grains for 52% weight retention. It looked a lot like a partition (which in my book is a good thing).
I have also shot the 180 grain version of the Scirocco and have found it to be deadly, but it does tend to flatten out more. I think the accubond in real world scenarios will penetrate a bit better, but the difference will be negligable.
Go with the accubond, I don't think you will be sorry.
|
|
Back to top |
|
|
300winnie Rookie Member
Joined: Feb 01, 2005 Posts: 10
|
Posted: Thu Feb 10, 2005 12:54 pm Post subject: Re: nosler accubond |
|
Here is a picture of the 200 grain Nosler Accubond I retrieved from my elk. Next to it is a virgin bullet.
www.huntingnut.com/ind...fullsize=1
|
|
Back to top |
|
|
FrozenDog Rookie Member
Joined: Feb 26, 2005 Posts: 4
|
Posted: Mon Feb 28, 2005 8:39 pm Post subject: Re: nosler accubond |
|
Sorry, guys, but weight retention less than 60% is less than impressive to me. For my own hunting use I load only Barnes X bullets, and I have never yet retrieved a bullet with under 93% weight retention, and that includes test bullets fired into a sand bank! I started reloading as a Nosler Partition fan, but I believe I have found something much better. Feel free to disagree, but allow me to have my own opinion.
|
|
Back to top |
|
|
DallanC Site Admin
Joined: Jan 18, 2005 Posts: 3585 Location: Utah
|
Posted: Tue Mar 01, 2005 3:39 am Post subject: Re: nosler accubond |
|
I spent a heap of money trying to get BarnesX's to shoot. Even XLC's weren't worth a crap out of my 7STW. Frustrated I bought a box of cheap-o factory Rem 140 grn cartridges... they shot under 1". I then bought a box of Safari Grade ammo with the Swift-AFrames, which again hovered right at 1" groups.
I wish the XLC's would have shot better but they are IMO, incredibly picky to get to shoot well.
I killed my elk this year at 380 yards with a single shot of the Safari grade ammo this year. when I get some more time this summer I plan to work up some new leadcore bullet loads. Not sure atm if I'll go partition, accubond, Scirocco or GrooveBullets.
-DallanC
|
|
Back to top |
|
|
shrpshtrjoe Super Red Neck Member
Joined: Jan 26, 2005 Posts: 2965 Location: Maryland
|
Posted: Tue Mar 01, 2005 10:56 am Post subject: Re: nosler accubond |
|
Howdy. I bin a fan of nosler for a long time. Have had great expierence with the partition. The ballistic tip is one accurate bullet but have had some entrance holes on deer i could put my fist in ( shoulder shots ) and more than once. Lung shot does pretty good. Took two deer this year with the combined technology silver ballistic tip in 7mm both lung shots it did very well i dont think i want to shoot the shoulder with it im worried i will get the same effect as the standard b/t. Im gonna try the accubonds and hopefully i will get b/t accuracy with partition performance.
_________________ "MOLON LABE"
P E T A
People Eating Tasty Animals |
|
Back to top |
|
|
calsibley Super Member
Joined: Jan 28, 2005 Posts: 317
|
Posted: Thu Mar 03, 2005 2:40 pm Post subject: Re: nosler accubond |
|
I reload the Nosler Bal. Tips in my 22 and 6mm centerfires. However, I much prefer the Nosler Partitions for 6.5 and larger. We probably have as many moose as deer in Canada, and I usually load up the Speer Gran Slams, and Rem. Core Loks for them along with the Nosler Partitions. I guess old habits die hard so I haven't tried the Barnes yet. Best wishes.
Cal - Montreal
|
|
Back to top |
|
|
Coyote_Hunter_ Member
Joined: Mar 05, 2005 Posts: 208 Location: Franktown, CO
|
Posted: Thu Mar 10, 2005 1:39 pm Post subject: Re: nosler accubond |
|
Dallan –
You might want to give the North Fork bullets a try. My 20+ year-old Ruger M77 has always been a good sub-MOA shooter but turned in the best 3-shot group ever with the North Forks – 0.266†center to center. They are built like a Speer Trophy Bonded but with grooves.
www.northforkbullets.com/
In my Marlin .45-70, the North Forks give me the most consistent loads I have ever built – by far. I’ve purchased some to use in my .300 Win Mag but haven’t had time to work up the loads yet.
BTW, I’ve had excellent results with the .257 115g TSX and .308 180g TSX.
_________________ Coyote Hunter
NRA, GOA, DAD |
|
Back to top |
|
|
DallanC Site Admin
Joined: Jan 18, 2005 Posts: 3585 Location: Utah
|
Posted: Thu Mar 10, 2005 3:41 pm Post subject: Re: nosler accubond |
|
Wow thanks for the suggestion. Those might be the ticket out of my STW... I've been wanting something with less friction and have been looking for moly type bullets but nothing has shot very well.
Thanks again for the tip
-DallanC
|
|
Back to top |
|
|
Blaine Member
Joined: Feb 24, 2005 Posts: 260 Location: Maine
|
Posted: Sun Mar 13, 2005 12:19 am Post subject: Re: nosler accubond |
|
Hi Joe,
In my attempt to find the factory loads my new T/C barrels liked best, I tried all the "premium loads" with all kinds of bullets. The Accubond was one of them. I had fair results with the 243 barrel but the 308 one gave me terrible groups. Now let me add that the headspace problems (and misfires) with these barrels couldn't really give the bullets a fair trial. Now that I'm back into handloading, I'm going to use my bullet puller and re-use the remainder of all my premium bullets in my new "super consistent" rounds that I'm working on now. I trust that I'll be able to give them a fairer test. If you do get some, would you let me know how they turned out?
Blaine
_________________ Shoot straight and above all shoot SMART....and remember God is still in control !!!! |
|
Back to top |
|
|
shrpshtrjoe Super Red Neck Member
Joined: Jan 26, 2005 Posts: 2965 Location: Maryland
|
Posted: Sun Mar 13, 2005 1:20 am Post subject: Re: nosler accubond |
|
Howdy. Picked up some 7mm 140 grain accubonds yesterday hopefuly i can get to the range next weekend and give them a try. If they shoot well i will try them on deer this year. I will let you know how i make out.
_________________ "MOLON LABE"
P E T A
People Eating Tasty Animals |
|
Back to top |
|
|
|