Dawgdad wrote: |
Great pictures! But wouldn't you measure from the right side of both collets and not in between them?( the sides that touched the muzzle) Otherwise your bullet jump will be the width of the second collet. One more caveat to throw in here. Long bullets may exceed your magazine length before you reach the rifling. not a problem if you single load but if you want a follow up shot....it has to fit in the magazine. |
woods wrote: | ||
Does seem counter-intuitive but you do measure as shown above. What you have to consider is that when you lock the rear collet against the bolt face, you have the other collet in between the rear collet and the muzzle. So you have already allowed for one collet width. |
All times are GMT - 7 Hours