Search found 914 matches

It worked great! Was able to take a whitetail after verifying zero. Also groups were sub-moa. My chrony is down which is a real bummer because I was really curious as to how close to the touted magnum ...

I had seen that as well but not having any experience with lead free bullets, like this and I am guessing the Barnes I didn't know if they substantially lowered pressures or not. I'm guessing this is ...

Worked up to a 50g charge of Vight N540 under a .323" 180g Nosler Ballistic Tip in a P.P.U. 8x60s case primed w Winchester W.L.R. primers to a C.O.A.L. of 80.88mm's. I'm fairly confident this will pro ...

Poking around turned up a Ken Waters' Pet Loads Supplement #2 to the Third Edition for $10. Which contained a load with same propellant charge and bullet weight combo. (His used a Speer 200g Spitz) Wh ...

I've worked up a load that is working in Both my 8x60S's so I thought I would pass it along because data for this round is hard to come by. Fed GM Large Rifle Primers, PPU Brass, 55g H4831, 200g Sierr ...

The Ross was a really under appreciated rifle, the .280 version always intrigued me.

8X60S

I'm glad you asked this Suz. I had assumed since it was marked 8x60s on the chamber it was a .323 groove dia. But looking around show that there are 8x60J bores as well. So I went ahead and slugged th ...

MODEL 21

6.5x57mm, 7x57mm, 7x64mm (scarce), 8x57mm, or 8x60mm cal., featherweight style design of the small ring Mauser type action, with (post-1949) or without 20mm dovetails on receiver ring and ...

I'm well, thanks for asking. A photo is in the Firearms gallery as well.

[img]http://www.huntingnut.com/index.php?name=coppermine&file=displayimage&pid=2789[/img]I just purchased a BRNO double square bridge, small ring, halfstock with double set triggers and a "butterknife ...

Since it is a s.s. slugging the bore would be pretty easy? Clean the bore, spray it with rem oil and jam some over sized soft lead through. Just make sure its soft pure lead. I've done this hundreds ...

My Schoenauer MCA .270 has a quick twist and shoots the 160g. Partitions well. The best load is IMR7828. Don't know if there is an AR equivalent or not.

.41's?[img]http://www.huntingnut.com/modules/coppermine/albums/userpics/17488/normal_pair_of__41%5C_s.jpg[/img]