| Author |
Message |
 Topic: Case Trimmer |
temmi
Replies: 50
Views: 41308
|
 Forum: Reloading Ammunition Posted: Wed Dec 20, 2006 11:04 am Subject: Re: Case Trimmer |
| I use the lyman Power trimmer and once you set the locks it is dead on for the rest... I have noticed that if you trim in 2 passes... that is trim a little and chamfer and deburr... then trim again, c ... |
| Topic: just want to doulbe check something |
temmi
Replies: 11
Views: 6891
|
Forum: Reloading Ammunition Posted: Mon Nov 20, 2006 11:44 am Subject: Re: just want to doulbe check something |
| In my experience the Horn SSTs have MUCH more weight variance than the Nosler… So you need more to get 20 of the same weight… My rifles like Nosler better… and so do I |
| Topic: Keyhole target hits |
temmi
Replies: 61
Views: 58204
|
Forum: Reloading Ammunition Posted: Fri Oct 27, 2006 2:10 pm Subject: Re: Keyhole target hits |
| Had a 22LR rem keyhole every shot... I sent it back to the factory... Rem sent me a new one. |
| Topic: Nickle vs Brass Cases |
temmi
Replies: 10
Views: 9183
|
Forum: Reloading Ammunition Posted: Fri Aug 25, 2006 2:34 pm Subject: Re: Nickle vs Brass Cases |
| I have used both extensively and while I prefer Brass, I have never had any problem with performance or longevity of nickle cases… The one “different†thing about nickel cases is th ... |
| Topic: velocity vs bullet weight |
temmi
Replies: 34
Views: 23484
|
Forum: Reloading Ammunition Posted: Fri Aug 18, 2006 10:37 am Subject: Re: velocity vs bullet weight |
My oldest son has a 450 Marlin... Its great and easy to load for....
It will be my next gun. If you are considering the 45-70 I would look long and hard at this one. he shoots a 300gr at 2100... very ... |
| Topic: de-burring center fire shells. |
temmi
Replies: 9
Views: 4906
|
Forum: Reloading Ammunition Posted: Thu Aug 17, 2006 10:35 am Subject: Re: de-burring center fire shells. |
I say this a lot so forgive me for restating it…
I believe in case prep...During the prep work I
• Size
• Trim to Uniform Length (This is a safty issue for rifles)
o Deburr & Ch ... |
| Topic: 30/06 Bullet Choice? |
temmi
Replies: 26
Views: 26311
|
Forum: Reloading Ammunition Posted: Thu Jul 20, 2006 10:33 am Subject: Re: 30/06 Bullet Choice? |
| I have been using 150gr in my 30-06. I use Hornady Interlocks among others, they are accurate and hard hitting. My son shot a smallish hog (175 Lbs) at 20 yrds the MV was about 2900 ft/sec… the ... |
| Topic: Cleaned it lately? |
temmi
Replies: 16
Views: 22899
|
Forum: Reloading Ammunition Posted: Thu Jul 20, 2006 10:23 am Subject: Re: Cleaned it lately? |
I do clean the shell holder every time I use it.
SOoo… This is a good time for some feedback. I use the spray “gun de-greaser†in my dies… and that is the only cleaning they ... |
| Topic: Required Reloading Books? |
temmi
Replies: 21
Views: 17065
|
Forum: Reloading Ammunition Posted: Mon Jun 19, 2006 1:23 pm Subject: Re: Required Reloading Books? |
WileyWapiti
I believe you should have at least the Reloading Guide from the Bullet & the Powder Manufacturer you are using. The more books you get and read the better perspective you get…. So ... |
| Topic: Clean, Dry Chamber |
temmi
Replies: 22
Views: 14555
|
Forum: Reloading Ammunition Posted: Fri Jun 16, 2006 11:21 am Subject: Re: Clean, Dry Chamber |
| Oil in the chamber will not compress… This means in effect a smaller chamber. It will affect both pressure and accuracy. I always “dry†the chamber with a Clean tight Mop &Patches. |
| Topic: Sorting brass is a pain |
temmi
Replies: 9
Views: 8139
|
Forum: Reloading Ammunition Posted: Fri Jun 16, 2006 10:53 am Subject: Re: Sorting brass is a pain |
| I agree with Bushmaster… For me Sorting, trimming Weighing, De-burring, uniforming… is enjoyable… and somewhat of a comfort. The problem with “pick-up†brass is you just ... |
| Topic: Handloading Myths Exposed |
temmi
Replies: 51
Views: 30341
|
Forum: Reloading Ammunition Posted: Fri Jun 16, 2006 10:44 am Subject: Re: Handloading Myths Exposed |
| Oddly enough… not only do I clean Primer Pockets… I Uniform them, and de-burr the Flash hole. I do believe this helps… One other thing this helps with is consistent weights. Yes I ... |
| |
Membership:
Latest: abnerRRR
New Today: 0
New Yesterday: 0
Overall: 13229
Members: 1
Visitors: 53
Staff: 0
Forum FAQ
Search
Log in to check your private messages
Login
