.45/70 govt

Elvis · Posted: Thu Jan 31, 2019 11:06 pm Post subject: Re: .45/70 govt

no way it would fit into a .410 mate and putting a scope on it would defeat the purpose of it.....wet weather and close range bush work.

slimjim · Posted: Fri Feb 01, 2019 6:42 am Post subject: Re: .45/70 govt

A red dot would work in the wet weather.

pete4d · Posted: Fri Feb 01, 2019 7:38 pm Post subject: Re: .45/70 govt

She looks good, you using an o-ring pick as an extractor ? Would like to see some of your groups , It takes me four or five fouling shots before they start to group good .

Mounted a Weaver base and a 1.5x4.5 scope on my sons first gun a Steven .410 , it would group on a 9-inch paper plate at 50yds. It was more a sighting devise and I'd take it off for squirrel season.

Something to run your mind. Cheers

PaulS · Posted: Sat Feb 02, 2019 1:24 am Post subject: Re: .45/70 govt

Barreled inserts always seemed like a good idea until I made one and used it.
How did you solve the problem of the changing point of impact each time the tube was removed and reinserted?

slimjim · Posted: Sat Feb 02, 2019 6:07 am Post subject: Re: .45/70 govt

Maybe clock the insert. I have to do this with the brass on my 45-70 rolling block because the breech block isn't truly square with the receiver. This way I don't get brass failures.

Elvis · Posted: Sun Feb 03, 2019 2:36 am Post subject: Re: .45/70 govt

so far so good..she has had 11 rounds down the tube and with crude shotgun bead sight we can hit a 4" black of wood at 20 yards...dug some projectiles out of the dirt behind it....10 inches in two that were lower power BP loads are pretty much still intact one you could nearly reuse...the one Bubba had hollow pointed that was travelling at approx 1500fps however is a button mushroom of about 1" diametre.......

slimjim · Posted: Sun Feb 03, 2019 7:27 am Post subject: Re: .45/70 govt

Elvis wrote:

had hollow pointed that was travelling at approx 1500fps however is a button mushroom of about 1" diametre.......

Elvis, that should do the trick! Can you use lasers over there? A green laser would really let you thread the needle.

Vince · Posted: Sun Feb 03, 2019 3:58 pm Post subject: Re: .45/70 govt

This is a fascinating project Elvis...I’m really enjoying the progress. It seems like you are well on the way to sorting not just your tubes, but the “black” and suitable loads mate.

Elvis · Posted: Sun Feb 03, 2019 10:45 pm Post subject: Re: .45/70 govt

yip we can use lazer beams Slim...but honestly I think it will be fine just the way it is.

pete4d · Posted: Mon Feb 04, 2019 7:50 am Post subject: Re: .45/70 govt

If'n you're hitting a 4" block at 20-yds that's gonna put you in the kill zone.

Would like to hear more about the loads you work-up as you go along. Cheers

Elvis · Posted: Mon Feb 04, 2019 11:36 am Post subject: Re: .45/70 govt

thats what Im thinking Pete
whenever someone asks how far will such n such rifle be ok to shoot deer out to,I reply the same way...as far as you can COMSISTANTLY hit a 3ltr milk bottle/half sheet of A4 paper/basketball as thats the kill zone size of most deer.